ZJR-250 Vacuum Homogenizer Emulsifier Cosmetic Cream Emulsion 250L Industrialized Production Equipment

The 250L vacuum homogenizer emulsifier machine ordered by Korean cosmetic customer is ready to be packed and shipped at YeKeey packing area.

Cosmetic cream emulsion 250L vacuum homogenizer emulsifier The machine ordered by the Korean cosmetic customer who mainly produces skincare creams and lotions is ready to be packed and shipped to YeKeey’s packing area. The vacuum emulsifier is the key machine in the cosmetic emulsification workshop, which has a direct impact on the production quality of cosmetics. The client was introduced by a former YeKeey client. The former original customer has been using YeKeey equipment for over five years. And the emulsifying machine purchased from YeKeey was working stably, so he recommended YeKeey to our new customer. After inspecting YeKeey, the customer ordered this 250L vacuum emulsifier for the production of creams and lotions in the cosmetic emulsification workshop.

The production process of cosmetic skin care lotion

Skin care lotion is usually liquid oil, mixed with a small amount of solid oil, and the amount of oil added is usually 10%-20%. The production process of cosmetic skincare lotion is shared below.

Production process:

1. Phase A components are evenly mixed in the emulsifier pre-treatment tank and heated to 80℃;

2. B-phase carbomer and xanthan gum are dispersed in water, thoroughly stirred and dispersed, and heated to 80℃;

3. The remaining components of phase B, agitate and disperse until the system is homogeneous;

4. To homogenize phase B, slowly add phase A, turn on the emulsifier and homogenize for 5 minutes until the system is homogeneous;

5. While the emulsifier is working, cool to 40℃, add phases C and D, mix well.

The production process of cosmetic skin care cream

The total oil content of skin care creams is generally higher than that of emulsions, and it is wider in the process of oil mixing. Compared to emulsion systems, the solid oil content of the system will be increased appropriately, so that it is easier to improve the viscosity of the system and the composition during use. membranous. The production process of cosmetic skincare cream is shared below.

Production process:

1. Add each component of phase A to pretreatment tank A and heat to 80°C;

2. At the same time, add each component of phase B to pre-treatment tank B and heat to 90°C (sodium hyaluronate and carbomer. 940 is pre-dispersed with glycerine and propylene glycol);

3. While agitating phase B, add phase A, pre-emulsify for 5 minutes, then turn on the foam concentrate to homogenize for 3 minutes;

4. While stirring, add the phase C components;

5. After cooling the product to 45°C, add the components of phase D and homogenize for 2 minutes;

6. Continue to stir and let cool to room temperature.

ZJR series vacuum emulsifier is an ideal cosmetic production equipment. It includes main emulsifying tank, pre-dispersion processing tank commonly used in cosmetic production, and functions such as cooling, homogenizing, stirring, cooling, etc. It is designed and manufactured according to GMP sanitary standards and can fully meet the cosmetic preparation technology requirements for the equipment. The cosmetics produced are delicate, stable and uniform, which can guarantee the quality of the cosmetics well. It is the main equipment for the production of high-end cosmetics.

Introduction of ZJR-250L Emulsifier

ZJR-250L vacuum homogenizer is hot sale in our factory. It is widely used for lotions, creams, gels, ointments, pastes, sauces, toothpastes, etc. in the cosmetic, pharmaceutical, food and chemical industries. Water phase tank and oil phase tank are optional, it saves heating time and improves production efficiency.

250L means the total volume of the homogenizer tank, the max. working capacity is 80%, the min. working capacity is 30%. If you want to process lower capacity materials, the bottom homogenizer is available. There are two bottom homogenizers for choice, one type with circulation pipe, it is emulsified in the pipe during circulation. The other type without a circulation pipe, the in-tank homogenizing head, is emulsified in the tank.

This ZJR-250L vacuum homogenizer with temperature machine is good for rapid heating and cooling, the max. the temperature can be 300 degrees C even higher. The temperature machine will save you a lot of production time, and it is equipped according to the technical process. You can also heat and cool the material by heating and cooling the shirt. The heating temperature of the cosmetic material is 70-80 degrees C, it is also fast due to the heating of the jacket.

Besides the ZJR-250L vacuum homogenizer, there are many other models to choose from. You can choose it according to your production capacity. The production capacity batch from 30 liters to 5000 liters. Besides, there is ZJR-5 or ZJR-10 lab vacuum homogenizer for your choice.

Welcome to contact YeKeey, you will get professional solutions and machines here. visit www.yekeey.com for more.

Media Contact
Company Name: Wuxi YeKeey Automation Technology Co., Ltd.
E-mail: Send an email
Call: 86-0510-88530899
Address:No.2855 Jiaoyang Road, An Zhen
City: wuxi
State: jiangsu
Country: China
Website: https://www.yekeey.com/

About Donald Martin

Check Also

Frost inside? That’s because Australian homes are more akin to tents than detached eco-buildings | Philip Oldfield

AWhen winter sets in and temperatures drop, it can sometimes be as cold inside as …